Community Forums > Voobly Support and Game Complaints Support > Game related Problems and Questions > Network Connection Error [Code: 10000001]
2 Usuario(s) están leyendo este tema (en los últimos 30 minutos)
0 miembros, 2 invitados
0 miembros, 2 invitados
今人気なコンテンツ:
Word Association (61 人が視聴中)
CBA PathBlood 1.8.0 (27 人が視聴中)
AoKTS updates (26 人が視聴中)
TIW 2020 Map votes (25 人が視聴中)
TDII (21 人が視聴中)
New Voobly Client 2.7 (20 人が視聴中)
Top 5 players of all time (R6) (20 人が視聴中)
過去一週間でアクティブなスレッド
Restore Problem (12 個のレス)
Old VCOM/Tournament forums (7 個のレス)
Which AI can play DE Islands cus... (7 個のレス)
Can't launch AoM T (6 個のレス)
AOM Error "Unsupported Grap... (6 個のレス)
Please resume patch development ... (5 個のレス)
Cant join voobly to play = Direx... (4 個のレス)
There is an inverter that takes care of power fluctuations or outages so that is covered.
Even on the ping -t 8.8.8.8 window I did not see any request time outs yesterday when it happened. But I am very clueless as to why it is happening.
Maybe I am chasing a ghost.
are all routers in the same subnet like: 192.168.1.0?
the zyxel thats your log in to the isp. that should be were its dhcp server sends ips to the rest of your network. thats were you port forward, no were else. the other two routers are just "slaves". on those turn off their f/walls. apply/save.
This is the result in ipconfig /all when connected to the Access Point (WNR)
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : DW1501 Wireless-N WLAN Half-Mini Card
Physical Address. . . . . . . . . : C0-CB-38-7F-A2-E7
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::ac54:e953:5bdb:fe2a%12(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.3(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 20 May 2018 07:02:24
Lease Expires . . . . . . . . . . : 21 May 2018 09:13:00
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 314624824
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-21-56-CC-46-F0-4D-A2-9F-37-45
DNS Servers . . . . . . . . . . . : 10.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
i think you have the set up wrong which may account for your problem. the ip above is 10.0 etc. whats the ip of the zyxel, 192.168. i would think.
what you have or should have for best results, is a daisy chained set up. if you google daisy chained you will see what i mean.
Let me try configuring that, and will be abck.
ok
Then I configured port forwarding on it. See attached. Then I ran voobly network diagnostics and results were positive. See below.
This used to return me warnings found, but now it is all positive.
Starting networking diagnostics...[You must login to view link]
Your local network port (UDP) is 16000. All game traffic is routed through this port. This can be changed in "Settings" -> "NAT Traversal".
Attempting to connect to 3 test servers. This will take around a minute to complete...
Received data from 'server 1' through port 16000 (this is your WAN or router port)
Received data from 'server 3' through port 16000 (this is your WAN or router port)
Received data from 'server 2' through port 16000 (this is your WAN or router port)
14 seconds left.
9 seconds left.
4 seconds left.
Test Result: All Pass
Network Health: All tests passed
Recommended Action: None
Details: All tests passed.
For help understanding this report or for more information go to http://www.voobly.com/pages/view/177#Network_Diagnostic_Tool.
After that, I configured my access point WNR2005. I could not setup in daisy chain mode, because it was asking me for primary dns and etc which i did not know.
Again after connecting to access point I ran network diagnostics, and results were the same. ALl positive.
Does it sound correct?
I will monitor it for some days, and hopefully this should solve it.
ok
not sure why it needs dns for WNR2005. to set it up as a chain, turn on the dlink dhcp, apply/save.
log in to the WNR2005 open its lan page and give it a new private ip in the same subnet as the dlink[ ie: 192.168.1.251] [which should be outside the range of the dlink dhcp] turn off its dhcp. turn off firewall. turn off upnp. on page that shows type of connection, use the drop down to set it as "ether net or bridge." apply/save everty time a router page is altered.
the wi-fi remains the same.
now the dlink conducts all connections.
or
try your set up and see.